Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Chi tiết sản phẩm

Cầu nâng 2 trụ AutopStenhoj Maestro 32 M
Mô tả

Model: Maestro 32 M

Hãng sản xuât: AutopStenhoj

Xuất xứ: Đức

Lifting capacity, up to 3,200 kg
Stroke length 1,900 mm
Working height 2,000 - 2,040
Lifting / lowering time ~ 35 sec.
Voltage 3 x 230/400 V - 50 Hz - 20 A
Motor 2 x 2.8 kW
Lifting pad included in the delivery F: 11027: 100 - 140 mm
Total height post 3100 mm
Total height incl. portal 4,060 - 4,420 mm
Drive-through width 2,205 mm
Min. height 100 mm, 90 mm with extra lifting pad 29265
Width between posts 2,565 mm
Arm length front, min. - max. F DT: 640-1,175 mm
Arm length rear, min. - max. F DT: 640-1,175 mm
Insertion height in swivel arm F Std: 65 mm


  • Available with different voltages
  • F = flex pad
  • DT/DT = double telescopic short arms / double telescopic long arms


  • Available with different portal heights, alternatively in-ground kit
  • Set of expansion bolts
  • LED-lighting set, flexible with spiral cable, fastening through magnets on posts or vehicle
  • Energy set with compressed air and socket-outlet
  • Extra control unit for second post
  • Large program of extra pads, depending on type of vehicle
  • Special colours available on request!


Maestro 32 M - Suitable for the safe lifting of electric vehicles


  • Asymmetric post installation, vehicles can be positioned in rear area of work bay, for better door-opening angle
  • Very stable bent posts
  • Without base frame, therefore free drive-in situation
  • Two strong electric motors
  • Cold-rolled spindles for high durability
  • Nylon nut sets for high durability
  • Long carriage with optimized mounting of 8 sliding blocks for low friction
  • Carriage with threaded holes for easy adoption of diverse superstructures
  • Door-stop mounted on carriage
  • Obstruction system for stopping the lift when it hits an obstracle
  • Pushbutton control unit with alarm signal
  • Programmable limit switch for top stop and CE-stop
  • Electronic synchronization through comparison of pulses measured on the pulleys


  • Universal lifting area from small passenger car up to BMW series 7 long G12
  • Possibility of parallel parking of arms for easier and faster positioning of vehicles
  • Arms can be opened more than 180° for better drive-in situation (+45°) for lifts installed in 90° angle to the drive lane
  • Low minimum height

Standard colours:
Carriage and arms: RAL 3020 – red
Posts: RAL 7016 – grey




Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Cầu nâng 2 trụ AutopStenhoj Maestro 32 M

Hotline tư vấn: 0913 023 733